Loading...
News Article

Sumitomo Electric develops 'post-5G' GaN-HEMT

News

Device uses N-polar GaN and hafnium for the gate insulating layer

Sumitomo Electric has developed a GaN-HEMT that uses N-polar GaN and, for the gate insulating layer, the world's first hafnium (Hf)-based, highly heat-resistant, high-dielectric material, setting its sights on the post-5G era, which will realise even greater capacity and high-speed communications.

Conventionally, Ga-polar (0001 orientation) GaN has been widely used. Along with the demand for further higher power and higher frequencies, however, attention is being focused on the improvement of characteristics with N-polarity (000-1 orientation) (the crystal orientation is different from that of the Ga-polarity), which enables an inverted HEMT structure that increases the degree of freedom in device design and can reduce leakage current (pictured above).

Meanwhile, N-polar crystals have the problem of being prone to irregularities caused by abnormal growth called hillocks. In addition, in terms of device design, the realisation of an inverted HEMT structure required the development of a high-quality gate insulating layer that would serve as a barrier against the gate electrode in place of the conventional semiconductor barrier layer.


Sumitomo Electric has made high-quality N-polar crystals without hillocks (see picture above). In addition, by applying a type of Hf-based highly heat-resistant and high-dielectric material, used in state-of-the-art siliconi transistors, to the challenging gate insulating layer for the first time, the company completed an N-polar crystal transistor incorporating a high-dielectric material and achieved excellent high-frequency characteristics.


This achievement is the result of the 'Research and Development Project for Strengthening Post-5G Telecommunication System Infrastructure' commissioned by the New Energy and Industrial Technology Development Organisation (NEDO). The details were announced on October 17, 2022 (local time) at the 2022 IEEE BiCMOS and Compound Semiconductor Integrated Circuits and Technology Symposium (BCICTS) held in Phoenix, US

QD company Quantum Science expands into new facility
Innoscience files lawsuit against Infineon
Riber revenues up 5% to €41.2m
Forvia Hella to use CoolSiC for next generation charging
Photon Design to exhibit QD simulation tool
Ortel transfers CW laser fabrication to Canada
Luminus adds red and blue multi-mode Lasers
PseudolithIC raises $6M for heterogeneous chiplet tech
Mesa sidewall design improves HV DUV LEDs
IQE revenue to exceed expectations
'Game-changing' VCSEL system targets clinical imaging
German start-up secures finance for SiC processing tech
Macom signs preliminaries for CHIPS Act funding
IQE and Quintessent partner on QD lasers for AI
EU funds perovskite tandems for fuel-free space propulsion
EU to invest €3m in GeSi quantum project
Transforming the current density of AlN Schottky barrier diodes
Turbocharging the GaN MOSFET with a HfOâ‚‚ gate
Wolfspeed launches Gen 4 SiC MOSFET technology
Report predicts high growth for UK's North East
Element Six unveils Cu-diamond composite
SemiQ launches hi-rel 1700V SiC MOSFETs
Lynred to exhibit Eyesential SWIR sensor for machine vision
Thorlabs buys VCSEL firm Praevium Research
Advancing tuneable InP lasers on a heterogeneous platform
P-GaN gate HEMTs have record threshold voltage
Guerrilla RF releases GaN power amplifier dice
Narrow-linewidth DFB lasers now at 405 and 488nm
Researchers develop tech for future fast-charging stations
Vermont GaN Tech Hub awarded nearly $24M
Onsemi completes buy-out of Qorvo SiC JFET business
Quantum Science announces Innovate UK funding
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
x
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: